The Duraflame heater fan not working is one of the common problems that users encounter with this heater. A functioning heater fan is required in order for the Duraflame heater to blow hot air.
Now, there are quite a few reasons why the issue occurs, including broken motors, clogged blades, loose wiring, and thermostat issues.
In addition to these, a damaged switch, faulty temperature gauge, and disrupted airflow are also reasons behind the Duraflame heater fan not turning on.
In order to make the fan work again, identifying and solving the problems are a must. So, continue reading till the end of the guide.
Table Of Contents
- How To Reset The Duraflame Heater
- Duraflame Heater Fan Not Working [7 Simple Fixes]
- 1. Broken Motor
- 2. Clogged Blades
- 3. Loose Electric Connection
- 4. Thermostat Issues
- 5. Faulty Temperature Sensor
- 6. Damaged Switch
- 7. Disrupted Airflow
- Duraflame Heater Cool-Down Cycle
- How To Clean The Duraflame Heater
- Do Duraflame Heaters Have A Reset Button?
- Why Does My Duraflame Heater Keep Shutting Off?
How To Reset The Duraflame Heater
Oftentimes, resetting the Duraflame heater causes the fan to start turning properly once again.
Now, the Duraflame heater reset is quite easy, but there are two stages involved in the process. The first stage is known as the manual resets and the steps are:
- Turn the Duraflame heater off and unplug it from the power source.
- Let the heater sit for 5 minutes.
- Plug the heater back in and turn it on to see the fan working again.
If the Duraflame heater fan doesn’t work even after the manual reset is done, it’s time to do the Master Reset. Now, the Master Reset is stage two of the resetting process and the steps are as follows:
- Turn off the heater and unplug it from the source.
- Press the main switch of the Duraflame heater and without releasing it, plug the heater back in.
- Press the switch for 5 more seconds after plugging the heater and release it.
- Turn the heater on and check whether the fan is functioning or not.
However, if you find out that the Duraflame heater fan isn’t working after resetting the heater, it means that there is an internal problem.
The function of the fan is prevented due to the problem and it won’t work until the issue is solved.
Duraflame Heater Fan Not Working [7 Simple Fixes]
Here, we will talk about all the possible reasons that result in the Duraflame heater fan not working even after resetting. Let us discuss the details of these problems and how we can solve them.
1. Broken Motor
One of the top reasons behind the Duraflame heater not turning is the broken motor of the fan. The fan won’t be able to work if the motor is damaged in any way, thus, affecting the performance of the heater.
How To Fix It
The solution to the issue is simple and all you have to do is follow a few steps. Turn the heater off and wait for it to cool down completely. Check the motor of the fan and ensure that it’s working perfectly.
Repair the motor or replace it with a new one and make sure that it’s set properly. Turn the heater back on and check whether the fan is working.
If you can’t replace the motor on your own, take help from a professional.
Plus, watching the video will be helpful for you.
2. Clogged Blades
The clogged blades are another common reason why the Duraflame heater fan doesn’t turn. Over time, the fan blades accumulate dirt, dust, debris, and so on that cause the blades to clog. Not only that but rusting of the blades also contributes to the issue.
How To Fix It
Turn off the Duraflame heater and open the fan casing. Make sure to turn the main connection to the heater off. Wipe the blades with a piece of cloth and remove all the dirt, dust, debris, etc.
Replace the fan blades if they are rusted and place the fan back properly. Turn the heater on to ensure that it’s working perfectly.
3. Loose Electric Connection
In order for the Duraflame heater fan to work, it’s essential to ensure that all the connections to the fan are properly connected.
However, the wires often become loose and cause the connection to break. Not only that, but a faulty control board also breaks the connection.
How To Fix It
Switch off the main connection to the Duraflame heater and wait for it to cool down. Open the control board and check the wiring connected to the fan and make sure that it’s in perfect condition.
Take help from the Duraflame heater manual and put all the wires in place properly.
Check the control board and ensure that there isn’t any damage or fault. Repair or replace the control board properly. Turn on the heater and make sure that the fan is working properly.
4. Thermostat Issues
The thermostat is an essential part of the Duraflame heater and issues related to the thermostat often prevents the fan from working. If the thermostat is malfunctioning or has any faults, then it won’t be able to set the temperature properly.
Not only that but setting the temperature at a lower level compared to the room’s temperature will also result in the fan not working.
How To Fix It
Turn the heater off and allow it to cool down completely. Check the thermostat connected to the Duraflame heater and ensure that it’s in proper condition. Repair or replace the thermostat according to the problem and install it perfectly.
Set the temperature to a level higher than the room temperature and turn the heater back on.
5. Faulty Temperature Sensor
Another common reason that results in the Duraflame heater fan not working is the faulty temperature sensor. The main purpose of the temperature sensor in the heater is to detect the temperature in the system and control the fan accordingly.
If the temperature sensor is faulty, it will detect an incorrect temperature thus, affecting the functionality of the heater.
How To Fix It
Switch off the main connection to the Duraflame heater and wait for it to cool down completely. Examine the temperature sensor properly and ensure that it’s functioning properly.
Replace the sensor with a new one and turn the heater back on to make sure that the fan is working.
6. Damaged Switch
A damaged switch of the Duraflame heater is often responsible for the fan not turning. Oftentimes, the switch ends up melting or gets damaged due to a connectivity failure.
If the switch fails and is broken, then the connection to the fan won’t be established correctly. This will result in the Duraflame heater fan not working.
How To Fix It
Turn off the heater and check the switch properly for any damage. If the heater is damaged, replace it with a new one and install it properly in place. Turn on the heater and ensure that the fan is rotating.
7. Disrupted Airflow
Last but not least, the disrupted airflow also contributes to the Duraflame heater fan not working issue. Dirt, dust, and debris accumulate in the air pipes and filters that block the airflow. This causes the air to get trapped and prevents the fan from working.
How To Fix It
Switch off the Duraflame heater and make sure that you let it cool down completely. Take out the filters of the heater and clean them properly. Make sure to remove all the dirt accumulated on the filters and clean the air pipes as well.
Turn the heater back on and maintain a proper cleaning schedule on a regular basis to prevent dust accumulation.
Duraflame Heater Cool-Down Cycle
The Duraflame heater cool-down cycle is a normal procedure for the heater and there’s nothing to worry about. However, during the cool-down cycle, the Duraflame heater fan won’t work and will blow out cold air instead of blowing hot air.
The cool-down cycle is a safety procedure that prevents the heater from overheating and allows it to function more efficiently.
When the cool-down cycle occurs, you will have to wait till the cycle is over and the heater will start functioning normally again.
How To Clean The Duraflame Heater
As we can conclude from the reasons for the Duraflame heater not working properly, keeping the heater clean is important. Cleaning the dirt, debris, and dust accumulation off the heater is essential to prevent them from clogging the heater and affecting its performance.
Take out the filters and clean them properly with a small vacuum or duster. Clean the air pipes properly and make sure that there is no dirt or dust accumulation left.
Take a piece of cloth and clean the fan blades properly. Turn on the heater to make sure that it works perfectly.
Tip: Make sure to turn off the heater before cleaning and maintain a proper cleaning schedule.
Do Duraflame Heaters Have A Reset Button?
Duraflame heater doesn’t have a specific reset button. However, the Master Reset requires pressing the main switch for a few seconds to get the heater working back again.
Why Does My Duraflame Heater Keep Shutting Off?
The Duraflame heater keeps shutting off for a number of reasons. Overheating, malfunctioning sensor and thermostat, no power, damaged wires, blow fuse, and damaged heating element are the culprits.
We are now at the end of the guide, and I believe you know the reasons behind your Duraflame heater fan not working. Whenever you come across the issue of the Duraflame heater fan not turning, take help from our guide and solve the issue on your own.
Leave a comment in the box below if you have any questions or concerns regarding the Duraflame heater. We will get back to you as soon as we can with the proper answer.